The maker kit is a good tool to get started with our SwiftIO board. You could learn the basic electronic concepts and start to build your DIY project. The parts in the maker kit use grove connectors, so you don't worry about circuit wiring at the very beginning.
In our maker kit, you could find different parts for their specific usage. Let's find them out together.
Each module has a simple mission to get you familiar with the basic electronics. After the first ten missions, let's explore more about it.
Mission1_Blink - blink onboard blue LED.
Mission2_RGB_LED - blink red, green, and blue LEDs one after another.
Mission3_Push_Button - press the button and the red LED will turn on.
Mission4_Potentiometer_RGB - turn the potentiometer and the LED blink rate will change accordingly.
Mission5_Buzzer - turn the potentiometer to generate different sounds.
Mission6_Seven_Segment_Display - display number on the 7-segment display.
Mission7_DC_Motors - change the motor rotate speed with the potentiometer.
Mission8_Servo_Motor - use the potentiometer to control the servo.
Mission9_LCD - Display "Hello World!" on the LCD.
Mission10_Humiture_Sensor - Show the temperature value on the LCD.